A Look At Missing Child Statistics}

Submitted by: Richard Armen

When a child goes missing, everyone in the community is affected, especially those who have children themselves or who know the missing child. Child abduction is a crime that will have a lasting effect on everyone involved, particularly the family of the child.

According the FBIs National Crime Information Center, parents call the police 2,100 times per day to report a child who has disappeared for any length of time. While most of these return home safely within minutes or hours, it is the cases in which the disappearance stretches to days that make national news.

A stereotypical kidnapping, in which a child is snatched by a stranger, occurs an average of 115 times each year, according to the U.S. Department of Justice. While these cases stay in the memories of residents for decades, the actual occurrence of a stranger abduction is rare. It is far more likely that the abductor will be someone the child knows, maybe even a family member. Over 200,000 children are taken by family members each year. Still, the possibility for both types of abductions should certainly be recognized. Even though statistics prove strangers abducting children is a rare occurrence, these statistics don’t offer any comfort to the parents of a child who is missing.

[youtube]http://www.youtube.com/watch?v=wEe01YEOLpI[/youtube]

A third category of child abductions is only now coming to light, and these are cases in which the missing child has been lured by information posted online. Are your children or teens active on social networking sites like MySpace? Do they chat online with people they don’t know in real life? The internet has unfortunately created numerous opportunities for criminals to prey on children. Criminals posing as other kids and teens can easily strike up a conversation with your unsuspecting children.

How can parents protect their children from lurking dangers? Education is your best tool for defense, although you must teach your kids not only about the dangers of strangers, but also about the possibility of dangers in acquaintances, people in positions of power, or even family members. As a parent, it is your responsibility to take the necessary security precautions, from locking doors and windows to keeping the computer in a family room where you can monitor internet use.

Furthermore, it is not enough to tell your child to avoid talking to strangers or just say no. Children are vulnerable because they are small and easily overpowered. Arm them with devices to protect themselves or summon adult help, such as a personal alarm. There are even child alarms shaped like panda bears or other child-friendly animals to help you and your children feel more at ease with the device.

If your child ever goes missing, for any length of time, what should you do? First, call the police. They can issue an Amber Alert, which has resulted in nearly 500 children being recovered to date. Second, they will help you search the area and question any suspects in the disappearance. The police have the ability to bring together the resources of media and journalists, the general public, and other law enforcement agencies to bring your child home quickly and safely.

About the Author: Resist Attack has a full range of

pepper sprays

to keep you and your family safe. Also check for current specials on

taser guns

Source:

isnare.com

Permanent Link:

isnare.com/?aid=497627&ca=Advice }

Australia/2007

Contents

  • 1 January
  • 2 February
  • 3 March
  • 4 April
  • 5 May
  • 6 June
  • 7 July
  • 8 August
  • 9 September
  • 10 October
  • 11 November
  • 12 December

[edit]

GNU Hurd operating system: first user program run using L4 microkernel

Saturday, February 5, 2005

A collaboratively-developed operating system kernel known as GNU Hurd has been made bootable using the L4 microkernel, which provides room for significant speed improvements over an existing implementation using the Mach microkernel. The newer architecture also has a more lively developer community.

Developer Marcus Brinkmann made the historic step and finished the process initialization code, which enabled him to execute the first software on Hurd-L4. In a message to the L4 port of GNU Hurd mailing list, Brinkmann wrote, “We can now easily explore and develop the system in any way we want. The dinner is prepared!”. [1] However, the kernel’s current feature set is very limited. “With my glibc port, I can already build simple applications, but most won’t run because they need a filesystem or other gimmicks (like, uhm, fork and exec), and I only have stubs (dummy functions which always return an error) for that now,” he added in a later posting. [2]

Compared with Linux and BSD Unix’s monolithic kernel architecture, a microkernel based operating system provides developers greater modularity and isolation from hardware, a big win with L4 already being available for a large number of hardware varieties.

There is a cost in speed for such abstraction, and this cost was higher on Mach, at around 15%, compared with only around 5% on L4 and it’s predecessor L3, both developed by Dr. Jochen Liedtke. [3]

The greater modularity and abstraction of a microkernel approach means that the microkernel itself does not need constant modification as is seen in the Linux kernel today, since it provides only the very minimum of services, and does so very carefully. Thus, the fact that L4 was developed in 1996 is seen as exemplifying this stability — rather than showing its age — since few, if any, improvements in approach have been imagined in the meantime.

However, the Mach kernel first developed ten years earlier at Carnegie Mellon University is seen as a flawed first implementation, with the lessons learned being implemented in microkernels like L4, known as second-generation microkernels.

The GNU Hurd forms the base of the GNU operating system, much of which has been widely adopted by users of other Unix-like operating systems, including Linux. The GNU Project has been developing the Hurd since 1983. In 1990, the GNU Project decided to use the Mach kernel, rather than writing their own. [4] The Hurd is released as free software under the GNU General Public License (GPL).

The Hurd kernel is an experiment which aims to surpass existing Unix kernels in functionality, security, and stability, while remaining largely compatible with them. It currently runs on Intel IA32 machines. According to the GNU Hurd project, “The Hurd should, and probably will, be ported to other hardware architectures or other microkernels in the future” [5].

`Hurd’ stands for `Hird of Unix-Replacing Daemons’. And, then, `Hird’ stands for `Hurd of Interfaces Representing Depth’ – perhaps the first software to be named by a pair of mutually recursive acronyms.

A limited port of Linux already runs on L4, known as L4Linux.

Ontario Votes 2007: Interview with Family Coalition Party candidate Kristen Monster, Willowdale

Wednesday, October 3, 2007

Kristen Monster is running for the Family Coalition Party in the Ontario provincial election, in the Willowdale riding. Wikinews’ Nick Moreau interviewed her regarding her values, her experience, and her campaign.

Stay tuned for further interviews; every candidate from every party is eligible, and will be contacted. Expect interviews from Liberals, Progressive Conservatives, New Democratic Party members, Ontario Greens, as well as members from the Family Coalition, Freedom, Communist, Libertarian, and Confederation of Regions parties, as well as independents.

Nokia Inc. announces plans for iPhone rival

Thursday, August 30, 2007

Announced early Wednesday morning at Nokia’s GoEvent, in a plan to expand the company’s revenue, Finland-based company Nokia Inc. is developing a mobile phone similar to its rival iPhone, which will be available in the near future for Nokia customers. The phone is expected to be available by 2008.

Most of the features are the same as the iPhone’s. They include music, games, and many other features, even ones that the iPhone may not have. Ovi (in Finnish meaning “Door”) will be the door for more than 2 million songs and games available for download on the new device. Users will be able to download wirelessly in their own home or anywhere there is access to a computer.

But this is not the first time Nokia has made an attempt like this to increase its revenue. In October of 2003 the company revealed the N-Gage, a game-playing cell phone, but was “stocked-out” due to poor sales. The N95 smartphone, which was released in the U.S. on April 7, 2007 (before the iPhone on June 29, 2007) includes WiFi, a GPS, a music player, and a 5 megapixel digital camera. The three other phones that were revealed at the event in London will be in-stock next quarter. The new N81 and the modified N95 smartphones were among the revealed at yesterday’s event; the N81 is a new member to Nokia’s smartphone family; the N95 has been modified by having more memory and a sleeker LCD screen.

When Nokia was asked about the striking similarity between this and the iPhone, Nokia’s Executive Vice President and General Manager of Multimedia, Anssi Vanjoki, said, “If there is something good in the world then we copy with pride.”

Nokia first demoed their iPhone rival August 29th. During their demo they omitted the fact that the demo was for the software to be in use, not the actual hardware.[1]

Keyboard Effects In Worship Hammond Organs And Lead Synth Sounds}

Keyboard Effects in Worship – Hammond organs and lead synth sounds

by

Musicademy

Hammond organ and lead synth sounds can be used in a highly effective way in a worship context, however the use of both of these sounds is heavily dependent on the role of the keyboard player within the band. These types of sound will tend to be used where there is already a reasonably full band to start with. This means that they will be most appropriate when there is already a full rhythm section. In practice this is likely to mean a group with drums, bass, rhythm guitar and either another guitar (electric) or someone playing first keys (who is likely to use mainly piano and electric piano sounds). As a rule of thumb it would be unwise to overuse either type of sound in a much smaller band.

Hammond organs (and synthesised emulations of their sound) are commonplace in many styles of modern music from rock to R&B. Originally intended as a cheaper alternative to the pipe organ, the Hammond organ was taken up by gospel and jazz artists because of its distinctive sound and the many possible variations in tone. These variations are selected using nine drawbars (per manual) each of which triggers a different note in the harmonic series for every key. Each drawbar has eight volume settings and it is the combination of these plus vibrato, percussion, overdrive and reverb effects which make up the overall sound of the Hammond organ.

In reality many of us will rely on preset sounds and patches rather than being able to create our own using dedicated hardware or software. A number of keyboards now offer the ability to alter drawbar and effects settings but there are still a great many which do not. Most general purpose synthesizers have Hammond organ sounds on their ranks but these may be known by different names. They could be B3, rock organ, jazz organ, full bars, soft organ and other similar names.

[youtube]http://www.youtube.com/watch?v=2vG-6lcj2nU[/youtube]

There are a number of different ways to use Hammond organ sounds which I shall outline briefly. The first is similar to the way one would use a pad sound playing chords to support the harmonic movement of a song. This is a very common way of using the sound as it can be much more immediate than a pad sound and also cuts through the mix lot better. You can use this style of playing in both fast, powerful songs and more ballad-like settings. Be careful when selecting sounds for different songs and make sure that the power of the sound matches the feel of the music.

With any style of Hammond organ playing it is extremely important to keep everything in the correct register. The lower parts of this kind of sound can muddy up the lower and middle parts of the overall mix so these are best avoided for all but fleeting moments it is better to keep most playing more than an octave above middle C for comfort.

One time when a lower register may be used is when utilising a common playing technique. Hammond organ players often use long glissandos up to a held note (or chord) in the higher register of the instrument. These can sometimes even be played with the forearm (and often with the palm of the hand). These can be used to great effect when building from a verse into the chorus of a song where the feel wants to be built up greatly. Smaller glissandos can also be used between different chords and this is a very common playing effect.

Another technique which is often used is to play melodic figures (around chord notes) underneath a held higher note. To use this technique it is important to find a note which will fit with a number of chords in a row so that this can be held over the top of the movement underneath it.

It is also possible to use Hammond organ sounds to play lead line melodies maybe in an introduction. If this is going to be used along with any of the other styles of playing outlined above it is important to change the volume of the keyboard carefully so that this line is loud enough without chordal playing becoming too dominant in the mix.

The last important point to make about Hammond organ sounds is the possible use of a Leslie speaker effect. Many keyboards and all good Hammond organ emulators now include the option for adding this swirling effect to the sound. To gain the best effect from the use of a Leslie simulator it is necessary to turn it on and off (or from fast to slow) whilst playing. This often necessitates playing mainly with one hand and keeping the other free to push the button or turn the modulation wheel.

Lead synth sounds are much quicker and easier to deal with than Hammond organs. This is partly because they are only used infrequently in a worship setting. You will find different lead sounds in many keyboards and these include Saw leads, Sine leads and Square leads along with numerous others. Most of the names relate to the shape of the wave which creates the sound. By their nature lead sounds will often be quite harsh so that they cut through the mix. The best use for these sounds is to create lead melody lines for introductions and links. It is very easy for these sounds to conflict with a lead guitar part if they are playing different things. However, if both instruments play the same riff or melody a very effective sound can result.

When dealing with any new sound one of the best things we can do is to listen widely and try to hear the application of these voices in different styles of music. Try to imitate or emulate these uses, even playing along with the track at home if possible. Try things out in rehearsals and see if it works but dont go ahead and use new ideas in a live environment until you are comfortable with them.

Andy Chamberlain (andy@musicademy.com) is co-founder of http://Musicademy.com, a music school that produces DVDs, online lessons and practical training in contemporary instruments particularly for church based musicians. Go to the website for DVD and online instruction in worship guitar, keyboards, bass, drums and singing.Read the article in context and other related topics on the Musicademy newsletter archivehttp://musicademy.com/news.html

Article Source:

Keyboard Effects in Worship – Hammond organs and lead synth sounds }

5 Tips For Successful Container Gardening With Flowers}

Submitted by: Theresa Goodman

If you follow these 5 tips for successful container gardening you will not only save time, but money, frustration and possibly embarrassment. As this is an increasingly popular venue for gardening, container gardening is making a fashion statement. Container gardens are already very popular for entries, patios and decks. Maybe you’ve thought about incorporating them into your office or home, but haven’t. If by chance you feel a little overwhelmed on the basics, here are 5 tips for successful container gardening, even if it’s your first.

Before you run off in all directions as if you had 2 hours to create a masterpiece, pause to do some planning. First think about what type of feeling you want to have, when you look at your container. For me, I want to feel like I’ve walked into my own “secret garden” and have a sense of calm. I think about how it will smell, and feel among other things. Is it going to be a focal point in a room, or mixed in as part of a theme? Will it be the centerpiece on a table, or placed in a semi-lit hallway?

Tip #1

Anything can be used as a container. If you are purchasing a container from the store, choose ones with drainage holes. However, if you can poke, drill or carve a hole in it then use it. Container gardens have been made from tables, old pots, milk cartons, cans, gloves, boots, pocketbooks, suitcases, pots, pans and mailboxes, just to name a few. You can be creative and recycle items to use as containers. Allow yourself to be creative. Be sure to clean it out, and let it dry thoroughly. If you’ve used any chemicals or any type of varnish, clean and let dry. Look around for anything that can be shaped to hold dirt.

Tip #2

Use containers larger than the root ball of your plant, considering the size of the mature plant. This is really important and sometimes we forget about how big the plant may actually grow or say to ourselves we’ll just transplant it as it grows. Therefore, you want your roots to be able to expand; otherwise the plant is going to eventually die. So read the information card to get a good idea of what size container you will ultimately need.

Tip #3

Use a good potting soil, compost or combination of both. I didn’t realize how many types and combination soils are available. Just because a bag of soil is on sale, doesn’t mean it’s good. Think of your soil as a primary food for your plants food chain. To get the desired results it pays to know what’s in a particular soil and if it what your plant/flower needs. Also, sometimes the soil may be too heavy for what you are planting. Just filling a pot up with dirt and stuffing your starter plant therein, may cause you to waste time and money.

Tip #4

In most containers the weight and scale of a container can become an issue when the pot has to be transported to a new location. The best thing to do is to move your pot to its final location before you plant it. You do have the option of reducing the overall weight of a large container. You can fill it with lightweight potting soil, ceramic beads, Styrofoam, broken pieces of pot, drainage gravel, pine cones, aluminum cans or small plastic nursery pots. I’ve even used an empty plastic milk carton.

Tip #5

Select plants that suit your light conditions. Too much sun for one plant will kill it while do little sun for another plant will do the same. Full sun means your plant will receive a minimum of six hours of sunlight daily.

If you follow these 5 tips, you will experience success in container gardening with flowers. You won’t pull your hair out, or throw darts at a dart board out of frustration, because you can get it right the first time.

About the Author: I enjoy gardening, specifically container gardening,so you can learn from my mistakes. I was a remedial gardener gone pro. That’s my final answer. The site is regularly updated. Be my guest and stop by!

containergarden411.com/blog

Source:

isnare.com

Permanent Link:

isnare.com/?aid=314336&ca=Gardening }

Eight dead and two missing after cargo ship fire in Kaliningrad, Russia

Sunday, June 8, 2008

Eight people are dead and two more are missing and presumed dead after an explosion and fire on a cargo ship undergoing repairs at a naval dockyard in Kaliningrad, Russia.

The container ship MV Yenisey was the scene of an explosion while in drydock at about 3:00 p.m. Moscow time (11:00 GMT). Ten people were missing after the explosion. It was confirmed today that the eighth body has been recovered, and the remaining two are thought to be dead as well. Three more were injured.

Captain 1st Rank Igor Dygalo, acting as a navy spokesperson, said “Each family of the victims of the fire on the Yenisey civilian vessel will be paid more than a million rubles.” This makes their compensation roughly equivalent to US$43,000.

Dygolo said that the dockyard, in the closed military town of Baltiysk, near Kaliningrad, had been leased to the Yenisey’s St Petersburg owner, a private company, who were conducting the work themselves. He said an investigation has been launched by the navy led by top admiral Vladimir Vysotsky.

Vysotski himself has indicated that serious safety legislation breaches concerning welding regulations by both the vessel’s owner and the naval dockyard’s bosses. He did not go into details, but RIA Novosti claimed that a source at the dockyard said a gas burner applied to the roof of a fuel tank to heat and therefore loosen its bolts had triggered the disaster.

Today is an official day of mourning for Kaliningrad Region to mark the deaths.

Militants in Pakistan torch NATO, US military vehicles

Sunday, December 7, 2008

Pakistani officials have reported that vehicles supplying NATO forces in Afghanistan have been set on fire by suspected militants. The attack occurred in the northwestern city of Peshawar which lies on Pakistan’s North-Western frontier at 0230 local time.

Sources claim that more than 250 gunmen using rockets, grenades and AK-47s overpowered the guards setting the Humvees on fire. The Pakistani officials claim that 96 trucks, 70 Humvees and 6 containers were destroyed.

In November this year, 12 lorries carrying Humvees were captured by the militants in the famous Khyber Pass. The convoy was also carrying food and aid to the NATO forces in Afghanistan.

NASA prepares to launch mission to nearby asteroids

Wednesday, September 19, 2007

NASA is beginning the final preparations for next Wednesday’s launch of the Dawn probe, aboard a Delta II rocket. The Dawn probe, costing over US$250 million, will visit the dwarf planet Ceres and the asteroid Vesta. The launch was originally planned for mid-June, however due to a damaged crate, shipping delays, and a damaged solar panel, NASA chose to delay it until now. Last week the spacecraft was delivered to the launch pad, and engineers performed tests to ensure that it is ready for launch. Today, the payload fairings were installed, and the probe is ready for its launch next week onto its 5 billion kilometer (3.2 billion mile) mission.

As the Delta II launches, three stages of rockets will propel the probe towards its first target. With the help of ion thrusters, it will reach Mars in mid-2009. Using Mars’ gravity, the probe will speed up and proceed towards the first asteroid, Vesta, in late 2011. After orbiting for seven months, it will leave Vesta in mid-2012, and arrive at Ceres in 2015. After making scans of Ceres, it will enter an orbit around Ceres that will ensure that it does not impact the asteroid for half a century. This is required due to the United Nations’ “Outer Space Treaty”, which states that “harmful contamination” of these asteroids must be avoided.

The targets of this mission, Ceres and Vesta, couldn’t be less alike. Ceres (diameter 975 km, 600 miles) is larger than Vesta (578 km, 350 miles). This makes Ceres approximately the size of Texas. NASA believes Ceres could contain water beneath its outer crust because, like Earth, its inner layers are heavier than the outer layers, and Ceres’ outer layer is lighter than water. Vesta, on the other hand, is the size of Arizona, and has a surface of volcanic rock, which astronomers believe came from its hot inner layers. Vesta also has a large crater – almost 500 km (300 miles) across – on its southern pole. The collision that caused this likely blasted enough rock into space to fill a container 160 by 160 by 80 km (100 by 100 by 50 miles).

The probe will make several observations of these asteroids: it will compare the makeup, shape, size, and densities, analyze craters, and determine mass, gravity, rotation. To determine the makeup, the probe carries a mapping spectrometer, and tools to map emissions of neutrons and gamma rays. Using this information, NASA can compare the formation of these bodies to learn more about our solar system, for example, to test a theory which states that a number of stony meteorites may be debris from Vesta.

There’s one more piece of equipment aboard the probe: A small silicon chip containing the names of 350,000 people who submitted their names to the “Send Your Name to the Asteroid Belt” campaign. After next week’s launch, the spacecraft will deploy its solar panels and undergo two months of testing before it begins the cruise to Mars.