With today’s technology and advances in steam equipment it is very easy, simple and safe to use steam for ice dam removal in Minneapolis, MN. However, just any steam won’t work, it has to be applied to the ice and show using low pressure and wet steam to have the greatest melting potential.
Low Pressure for Roof Safety
There are some companies that use high pressure options for ice dam removal in Minneapolis, MN. They tend to use a very wet steam, almost a liquid that is forced into the ice and snow at high pressure levels. The problem with this is the same as using any type of very high pressure cleaning equipment, it will damage surfaces.
High pressure steam cleaners are particularly damaging to asphalt shingles. Those little pebbles that help to protect the single and allow water and snow to slide off the shingles are removed under high pressure, gradually damaging your roof.
On the other hand low pressure ice dam removal in Minneapolis, MN provides the same volume of wet steam for maximum melting without the risk of any damage.
The Speed Factor
By using the low pressure, wet steam for ice dam removal in Minneapolis, MNprofessional companies are actually able to melt the ice faster than just using hot air alone.
The service will always start the process from the bottom or underside of the ice dam up, allowing the melted ice and snow to safely run off the roof as it would naturally. Sometimes inexperienced services offering ice dam removal in Minneapolis, MN approach the job incorrectly and find that it takes much longer as they have to keep reworking areas as they move down and along the roof.
Additionally, by using low pressure wet steam for ice dam removal in Minneapolis, MN the company limits the amount of additional water that is put onto your roof. Remember that all of that water has to come off the roof and reducing the additional moisture helps reduce ice below the roof on walkways, landscaping and on your trees and shrubs.
Having professional services come in for your ice dam removal in Minneapolis, MN really is the best possible option. They avoid damage and get the job done quickly and effectively.